86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


auto diagnostic obd

Products >> Ribbon cable for BMW E38 E39 X5 MID Radio BM+W Pixel Repair Tool

Ribbon cable for BMW E38 E39 X5 MID Radio BM+W Pixel Repair Tool

Build Your Online Product Catalogs?



Description
Product Name: Ribbon cable for BMW E38 E39 X5 MID Radio BM+W Pixel Repair Tool
Supply Ability: 100000
Related proudcts
Specifications 5*7*8
Price Term: FOB
Port of loading: shenzhen port
Minimum Order 10pc
Unit Price: 2.5

Ribbon cable is auto diagnostic obd flat ribbon cable for BMW E38 E39 X5 Multi information display Radio. BM+W MID pixel cable is essential for dead or fading pixel repairs. BM+W Pixel Repair Tool is used for BMW E38 E39 M5 X5 MID Units.

B M W MID Radio Pixel Repair Tool For E38 E39 X5 Radio pixel repair tools

Applicability: E38, E39, X5 cluster repair

BMW E38 E39 M5 X5 MID pixel cable ***ails

The OBC unit on the MID console - also known as radio telephone unit on BM+W E39 and X5 models from 1996-2003 are identical, using the same LCD and the same ribbon cable. There are minor differences, like one comes with telephone button, others are witout, however the LCD and the ribbon cable is the same at all 5 series (E39) and X5 (E53) models.

B M W Multi information display Radio Pixel Repair Tool For E38 E39 X5

B M W E38 E39 X5 MID Radio Ribbon Cable for BMW E38/ E39 / E53 (5 series and X5) MID units.

B M W MID Unit Ribbon Cable is essential for dead or fading pixel repairs.

B M W MID Radio Cable Installation Steps:

Firstly, Remove the B M W Audio Meter instrument glass and bottom shell.

Secondly, Cut off the center column needles with the electric heating wire one by one.

Thirdly, Please take the dial off ,then take the remainder of the needlesĄŻ tran***rent plastic columns out carefully.

Fourthly, Remove the old Instrument panel wire, then clean both ends of it. (Note: only can be cleaned with alcohol)

Fifthly, Cut a small triangular hole out with a small knife carefully. Then install the new Instrument panel wire alignment to the original location

Finally, Heat the Article adhesive evenly with T-iron to make cable-fused and then load it after cooling.

Contact Us
Company: auto diagnostic obd
Contact: Ms. sunshine liu
Address: minzhi
Postcode: 518000
Tel: 8613243751991
Fax: 86101547742
E-mail:         


Copyright© auto diagnostic obd All Rights Reserved.
Tel : 8613243751991 Fax : 86101547742
Powered by 86exporter.com